Enclosure:
– Minimum size of enclosure should be 6’ long x 2’ wide. (Please note, this will vary depending on size of individual snake to be adopted!)
– Preference will be given to tall enclosures that provide climbing room.
– The enclosure should be constructed with solid walls (no screen cages), have adequate top or side ventilation, and have at least three sides darkened or covered.
– The enclosure should be secure with either latching doors or a screen held on with clips/locking mechanism.
Temperature:
– The primary basking heat should be provided with an under tank heater or a radiant heat panel.
– The chosen heat source must be hooked up to a reliable thermostat, preferably a digital one.
– The temperature should be monitored with a reliable digital thermometer or a heat gun.
Substrate:
– The substrate provided should be safe and nontoxic as well as easy to clean.
– If a particulate substrate is to be used, there must be a plan for feeding time to ensure that the snake will not accidentally ingest the substrate while eating.
Water:
– A water dish should be provided, preferably one large enough to allow the snake to submerge.
Enrichment Items:
– There should be at least two hides (large enough for the snake to be fully enclosed) in the habitat, one on the warm end and one on the cool end.
– Other decorative items such as fake plants, climbing branches, etc are recommended.
Food:
– Boa Constrictors adopted from us should be fed frozen/thawed whole prey only.
Follow
